Carvera Tool Holder (Side Mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool Holder to carry all of the accessories for the Carvera. Mounts to the screen holder position, both side available.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 164
- Wydruki
- 1
- Wyświetlenia
- 670
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tool holder to carry the following items:
2X Side Mount Clamps
4X Top Mount Clamps
9X Alignment Dowels
6X Bit adapters / Probe tail shaft adapters
16X Bolts (Up to M6 possible)
12X Bits with standard case
2X Spindle Collets (for various sizes bits)
1X Hex tool (for bolts)
2X L-Brackets (Thick and Thin)
2X 4th Axis Chuck Tools (additional part required to be mounted on the back of the holder)
1X Bit Collar installation tool
1X Collet install / removal tool
This is a large part, you will need to print it out of something easy to print with. I used ABS and got some warpage. PLA may be the best material for this.
You will need 5X M3 heat set inserts. 3 for the mount plate and 2 if using the 4th axis tool holder on the back.