Carvera Tool Holder (Side Mount)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tool Holder to carry all of the accessories for the Carvera. Mounts to the screen holder position, both side available.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 164
- Makes
- 1
- Views
- 670
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Tool holder to carry the following items:
2X Side Mount Clamps
4X Top Mount Clamps
9X Alignment Dowels
6X Bit adapters / Probe tail shaft adapters
16X Bolts (Up to M6 possible)
12X Bits with standard case
2X Spindle Collets (for various sizes bits)
1X Hex tool (for bolts)
2X L-Brackets (Thick and Thin)
2X 4th Axis Chuck Tools (additional part required to be mounted on the back of the holder)
1X Bit Collar installation tool
1X Collet install / removal tool
This is a large part, you will need to print it out of something easy to print with. I used ABS and got some warpage. PLA may be the best material for this.
You will need 5X M3 heat set inserts. 3 for the mount plate and 2 if using the 4th axis tool holder on the back.