Squeeze Fan - POCKET SIZE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pocket-sized, fully 3D-printable Squeeze fan Fits Everywhere! Squeeze - cool yourself and repeat!
- Ocena
- 3,667 / 5
- Polubienia
- 365
- Pobrania
- 1589
- Wydruki
- 2
- Wyświetlenia
- 6220
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If gears are stuck, it might be caused by stringing or seam alignment(use random seam for best results), which can leave a ridge that causes jams.
To ensure smoother operation, perform post-processing such as sanding down the shafts and lubricating them if needed.
Indroduction
This is a fully 3D-printable hand fan powered by a crank mechanism. By repeatedly squeezing the handle, a connecting rod transforms linear motion into rotary motion, spinning the propeller at the front. The propeller securely mounts onto the shaft using a locking feature combined with a ball snap fit, and it’s available in both clockwise (CW) and counterclockwise (CCW) variants. (i recommend printing CW propeller) .
Everything is 3D-Printed
The model is divided into individual parts that are optimized for easy printing with minimum supports. All components are designed for snap-fit , press-fit assembly or screw in place, and glue is optional for added strength. Every connection type—whether snap-fit, press-fit, or screw—is clearly indicated in the Assembly of the included instructions.
Recommended print and matterial settings:
Material: PETG,ABS (PLA can be used also but i dont reccomend it )
Infill and wall count :
Gears: 20-30% infill , 2 walls (Gear 4 needs support)
Cases: 30-40% infill, 2-4walls (mine worked best at 4 walls) Upper case needs supports in screw conpartment
Press Fit Shaft : 100% infill
Propeller : 100% , infill Supports ON (Can be printed without supports also)
Other 20-30% infill
Use random seam for best results on the shafts
Layer height: 0.2 mm
Lubrication : I recommend lubricate the gears and shaft for smoother , quieter and longer operation , you can use vaseline , silicone oil, … (i tried it without lubrication and it worked )
Print orientation is optimized for minimal post-processing.
This is working principle:
Assembly instructions:
Follow this instructions to assembly
