YubiKey 5 NFC USB-C Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
YubiKey 5 NFC USB-C Adapter
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Huge thanks to the creator! I'd been looking for something like this for a while, and this design was exactly what I needed to build on.
I redesigned it with tighter tolerances and a more compact form factor to accommodate an iPad Mini 6 with a case. A couple of extra features were added as well:
Lid to keep everything secure
Small hole at the bottom so you can push the YubiKey out with a SIM card tool or needle
The updated version was made in Onshape, and you can check it out here. It uses a 1.5 mm tolerance, but there's a variable in the design if you want to tweak that.
Other notes:
You’ll need a flat USB-A to USB-C adapter, just like in the original design. They’re pretty easy to find on Amazon or AliExpress for cheap.
Print settings:
Printer: Bambu Lab A1 mini
Layer height: 0.2 mm
Supports: Not required
Print orientation: Print it standing up, with the USB-C hole facing the build plate
If you find this model useful, please consider leaving a like — it helps a lot and is always appreciated!