Fan on Monitor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Fan mounting system on top of a Monitor with a nearly free moveable and adjustable Fan - 80mm - 120mm - 140mm.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- GNU General Public License v2.0
This is a Fan mounting system on top of a Monitor with a nearly free moveable and adjustable Fan. Made for 8ßmm, 120mm and 140mm fans.
Material:
- Screws: 5x - DIN912 - M3 x 10mm
- Nuts: 3x - DIN 934 - M3
- Special Screws for Fans → see Picture
- Threaded rod M3, see pictures for details
- some sort of 12V power. I use a old power supply from a fritzbox and a barreljack-adapter and some wires (see picture)
See Pictures how to Build.
The fan mounts can be printed in two ways.
1. Use the .3mf and chance the settings for INFILL pattern an density to your liking
2. Oben the .stl than splitt the model. Add the modifiers for INFILL an PERIMETER to the inner round thing. Change the infill to whatever you like and change in perimeter the top and bottom layer to ZERO.
Affiliate-Links:
DIN912 Srcews M3x10: https://amzn.to/40wmr4S
DIN 934 Nuts - M3: https://amzn.to/4nrx56V
Threaded rod M3: https://amzn.to/3GmaO9R
Fan Screws: https://amzn.to/4lva1Co
Fan Rubber Mounts: https://amzn.to/3G41oQp
Barreljack-Adapter: https://amzn.to/46jaOly
M3 set with different M3 screws, nuts, washer, ... : https://amzn.to/4lyKubK
12V Power Supply: https://amzn.to/3GkjHki