Flashlight Ballmount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flashlight Ballmount for Articulating Mount
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was trying to find a Flashlight mount that I could use with the Articulating Arm from Sneaks. I couldn't find one, but I did find this Flashlight mount for a tripod on Thingverse and was using this generic webcam mount for the Articulating Arm. I fused them together, made the flashlight mount longer to cover the webcam holes, and added a cylinder to cover the screw hole on the bottom of the mount.
Printer:
Prusa MK3S+
Slicer:
Orca Slicer
Filament
Overture PETG Orange
First Layer Nozzle Temp:
225
Other Layers Nozzle Temp:
230
First Layer Bed Temp:
85
Other Layers Bed Temp:
85
Layer Height:
.2 mm
Wall loops:
3
Top & Bottom Surface Pattern:
Aligned Rectilinear
Infill Density:
15%
Sparse Infill Pattern:
Triangles
Internal Solid Infill Pattern:
Rectilinear
Supports:
None