1 / 10
Folding Hand Fan with Watermark Designs - Print-in-Place - No Assembly - No Supports — zdjęcie 1
1 / 10

Folding Hand Fan with Watermark Designs - Print-in-Place - No Assembly - No Supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A folding hand fan with engraved designs that is ready to use right of the build plate.

Ocena
3 / 5
Polubienia
130
Pobrania
648
Wydruki
2
Wyświetlenia
2004
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Summer
Licencja
Creative Commons — Attribution — Noncommercial

Check out the following video for the trick i used to easily engrave any design on this print-in-place hand fan. ▶

Leave a comment if you would like me to also upload the .BLEND file so you can try making your own hand fan designs. 😉

UPDATE

In response to the extensive popular demand (1 request comment) I have uploaded the .BLEND file.

I am ok with taking any user requests for a desired design, but I cannot offer any kind of ETA as to when they will be delivered. 🙂

4 design variations included:

  • Tiger & Dragon - big & small fan

  • Josef Prusa - big fan

  • Butterflies - small fan

  • I Love You (in 24 languages) - big fan

For the “I Love You” variation credits should go to @MERoy as I used the “I love you - Bookmark” model. (https://www.printables.com/model/132093-i-love-you-bookmark)

  • Big Hand Fan: 21cm long

  • Small Hand Fan: 16cm long

  • The handle also helps lock the fan when closed.

Have fAn! 😅

Special Features:

 

3D PRINTING NOTES

All the parts are so close together (0.20mm tolerance at the narrowest locations) that opposing seams between the blades could cause them to stick to each other. In order to avoid this i suggest the following settings (PrusaSlicer):

  • Keep the orientation of the model as is (do not rotate)

  • Seam Position: Rear

  • Seam gap distance: -15% (a negative value helps avoid tears in the perimeter)

Other important settings (PrusaSlicer):

  • Perimeter Generator: Arachne

  • Layer Height: 0.20mm

  • Extrusion Width: 0.45mm

  • Elephant foot compensation: 0.10mm

The Arachne setting along with the default 0.45mm extrusion width ensures that the design spots on the blades are 2 perimeter wide (as seen in the screenshot). I would not recommend any setting that leads to the blade design spots being printed as a single perimeter.

Updates

  • 2026.07.22

    • Re-uploaded the .BLEND file with some minor corrections on the small fan.

    • Uploaded a Blank version (no design) for both the big and small fan.

Tagi