NV-AA12 Airflow Amplifier for 140mm fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scaled up version of Noctua's NV-AA12 for use with standard 140mm fans, with 124.5mm hole pitch
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 266
- Wydruki
- 2
- Wyświetlenia
- 1211
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A scaled up version of the Noctua NV-AA1-12 Airflow Amplifier with mounts to work as a desk fan. The legs can also be modified as needed to attach to a wall etc.
There are 2 versions of the legs which pivot off the main body, and are secured by an M5 nut. Both legs are required for the fan to free-stand but only the small on is needed if the fan is to be mounted to a surface. These legs are much lighter and print a lot faster than the original.
An NA-IS1-14 Inlet on either side of the fan is recommended; one to better bridge the gap between the fan and the duct, and the other if a grille is needed.
The fan model (not included) can be found here.