Dual Pull Cord Blinds to Single Beaded Chain Converter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I converted my corded blinds into a single beaded chain so I could use a smart roller shade driver by replacing the knob
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Converts dual cord used on blinds into a single chain you can use most Smart Blind Drivers. It comes in two pieces, in the larger piece with a hole place the string of the cord through and tie a small slipknot. This video might be helpful:
The smaller piece is a cap that snaps on with pressure to secure the beads. Some of the tolerances might need tweaking so feel free to remix if you need to do so.
You might want a rubber mallet and flathead screwdriver in order to secure and remove the cap.
I used these beads https://a.co/d/fJWd706 and this driver https://www.zemismart.com/products/mtp1?VariantsId=17691 . But any beads with those dimensions should work on most drivers.