Single gang plate gasket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flush-mount gasket for low-voltage wall plates. Fixes bulging and gaps. Fits VCE and standard brackets.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
This is a 3D-printed gasket designed to help wall plates sit flush against the wall when installed over standard low-voltage mounting brackets (like those from VCE, Monoprice, Leviton, etc.). It compensates for the slight protrusion of retrofit-style brackets and hides any gaps or drywall imperfections.
Perfect for brush plates, coax, HDMI, and keystone wall plates—especially in home network setups, AV installs, or anywhere a clean finish matters.
- Compatible with standard single-gang low-voltage brackets
- Adds a subtle lift to eliminate bulging or gapping
- Easy to print and install—just place behind the wall plate
- Print in any color to match or accent your setup
Designed, tested, and field-proven in real installations. Clean, simple, and effective
- Material: Used PLA+ but can work with PETG and PLA
- NO supports
- Tested with VCE Low Voltage Mounting Bracket, standard size should work with other low voltage brackets
Shared for the maker community—free to use and remix for personal projects. Not for commercial resale.
NOTICE: Not reccomended for higher voltage brackets