1 / 5
“Harvest Flight” – Classic Halloween - Witch 2 - Little Witch Hueforge Halloween Art Piece — zdjęcie 1
1 / 5

“Harvest Flight” – Classic Halloween - Witch 2 - Little Witch Hueforge Halloween Art Piece

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Vintage-style Hueforge of a trick-or-treating witch walking before a glowing moon. Perfect fall decor, no AMS required.

Ocena
5 / 5
Polubienia
9
Pobrania
25
Wydruki
1
Wyświetlenia
77
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

🌕 “Harvest Flight” – Classic Halloween - Witch 2 - Little Witch Hueforge Halloween Art Piece

Take off into Halloween night with Harvest Flight, a charming Hueforge art piece from the Vintage Trick-or-Treat Parade collection by Manic 3D Prints. Featuring a young witch proudly holding her broom and pumpkin pail in front of a glowing full moon, this design captures the cozy excitement of a crisp October evening.

Created with Hueforge’s layered depth approach, this art piece delivers nostalgic beauty using just 4–5 filament colors—ideal for both single-color and multicolor printing setups. Perfect for gallery walls, tiered trays, or Halloween vignettes, it pairs wonderfully with the rest of the collection for a unified vintage look. A must-have for Halloween lovers who enjoy playful, enchanting seasonal decor.

 

Project: Classic Halloween - Witch.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Kexcelled Orange Transmission Distance: 8
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA Kexcelled Skin Transmission Distance: 4.4
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Orange
At layer #16 (1.36mm) swap to Yellow
At layer #19 (1.6mm) swap to Skin for the rest.

Please note, a height modifier was applied to ensure a thicker base - this results in the layer numbers being offset by 3 layers, however the heights remain consistent.

 

 

This print is part of a coordinated Hueforge series by Manic 3D Prints, designed to showcase a classic Halloween aesthetic using just 4–5 filament colors. Each piece in the collection features rich black, warm pumpkin orange, creamy bone white, and golden autumn tones to create a unified, vintage-inspired display. Mix and match panels for a seamless look across your tiered trays, shelves, or gallery wall this spooky season!

🎃 Halloween Hueforge Collection: Vintage Trick-or-Treat Parade 🎃

 

Want to sell your physical prints of this model? A commercial license is available through my profile.

This model was created by Manic 3D Prints using Hueforge, based on a concept and idea fully developed by us. The source image was generated with the help of AI as a tool to bring our vision to life. The 3D model itself was entirely designed and rendered by us using Hueforge as part of our original creative process.

Tagi