1 / 8
Portable Air Conditioner End Caps for Exhaust Hose Extension — zdjęcie 1
1 / 8

Portable Air Conditioner End Caps for Exhaust Hose Extension

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Allows you to use Portable Air Conditioner even if the Exhaust Hose doesn't reach from the Air Conditioner to the Window

Ocena
0 / 5
Polubienia
0
Pobrania
20
Wydruki
0
Wyświetlenia
501
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Why Needed

After I mounted the air exhaust passage that came with my Midea MAP08S1XWGR-T, part number 12120600A23603, I found that the included Exhaust Hose didn't reach.

I couldn't find an extension hose with matching fittings, so I bought a generic hose and made my own fittings.

Compatibility

This adapter was designed to match the fittings on the exhaust hose that came with my Midea MAP08S1XWGR-T.

It should work with the exhaust hoses for other Midea Portable Air Conditioners, as long as they use the same design.

Even if not, the “thread” design common to both end-caps should fit all 5.9" diameter generic hoses – you can split the model above where the threads end and make your own adapter.  Note: I believe the thread design works with both left-handed and right-handed threads, but I only tested left-handed.

Print

1 Midea End Cap

1 Midea Female Connector

4 Midea Clips

After Printing

  1. It should be obvious how to place the clips on the female connector.  After you do that, reinforce the connection using rubber bands as shown in the pictures.  Otherwise, the clips will pop off when you connect the female connector to the exhaust passage adapter
     
  2. Screw the end cap and female connector onto the respective ends of the  generic hose

 

Tagi