Portable Air Conditioner Output Diverter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to redirect the cold air exiting a Portable Air Conditioner to a more convenient direction
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 401
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Why Needed
After I mounted the air exhaust passage that came with my Midea MAP08S1XWGR-T, part number 12120600A23603 and extended the exhaust hose to reach it, I found that the air blew straight out the doorway, cooling the next room, not the needed room.
Compatibility
This diverter was designed to fit the grill of my Midea MAP08S1XWGR-T. It is a friction fit onto the vertical dividers, which I measured to be 2.7 mm wide.
If your grill is taller or shorter, adjusting that direction should be trivial in your slicer.
If the fit is too loose, some tape should fix that.
If the fit is too tight…I'm not sure what the best fix would be.
I needed 4 to cover the part of the grill where air comes out.
Note: the grill is wider, but it's just for show –- no air comes out the left side.
After Printing
Slide the diverters onto the grill, working from left to right (there is a slight overlap).