1 / 2
Half (0.5) Inch Tubing Adapter Cap for Klein Wire and Cable Pulling Lubricant — zdjęcie 1
1 / 2

Half (0.5) Inch Tubing Adapter Cap for Klein Wire and Cable Pulling Lubricant

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Use this to add a 1/2 inch tube extension to your Klein wire and cable pulling lubricant.

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
61
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Use this to add a 1/2 inch tube extension to your Klein wire and cable pulling lubricant. I used this tubing: Eastman 3/8 Inch ID (1/2 Inch OD) PVC Clear Vinyl Tubing, 20 Foot Length, 98566.

Assembly Directions:

  • Cut desired length of tubing, making sure to keep the cut end clean and flush.
  • Clean tube end and cap tip with isopropyl alcohol or similar cleaning agent.
  • Apply adhesive (I used Starbond "Flexible" Medium-Thick Super Glue) inside of cap tip and around tube end.
  • Insert tube end into cap tip.
  • Wipe off any excess adhesive.

Tagi