1 / 3
Commercial Tier Certificate and Badge - No AMS or similar system needed — zdjęcie 1
1 / 3

Commercial Tier Certificate and Badge - No AMS or similar system needed

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Badge, stand, and certificate for commercial tier subscribers

Ocena
0 / 5
Polubienia
3
Wydruki
0
Wyświetlenia
56
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office

This model contains a PDF certificate authorizing you to sell prints of my models for as long as you're subscribed to the Obsessor tier.

It does not require an AMS or similar color changing system to get the colored effect. The pictures displayed were done using the color swap method.

There are two different prints available. You can print a stand or you can print a badge.

The Display2.stl model is meant to be glued in both Display1.stl and Display_Simple.stl. It's keyed so it can only be inserted in one direction.

Printing Instructions:
The 3mf file was created using Bambu Studio and has the following settings already configured.

Layer height: 0.2mm
Supports: Nope!

Display1.stl
- Add pause or color swap at layer 16 to change filament colors

Display2.stl
- Add pause or color swap at layer 10 to change filament colors

Display_Simple.stl
- Add pause or color swap at layer 26 to change filament colors

Feel free to join my discord for additional support, questions, or suggestions!