1 / 3
Commercial Tier Certificate and Badge - No AMS or similar system needed — image 1
1 / 3

Commercial Tier Certificate and Badge - No AMS or similar system needed

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Badge, stand, and certificate for commercial tier subscribers

Rating
0 / 5
Likes
3
Makes
0
Views
56
Reviews
0

Updated at source:

Model information

Category
Office

This model contains a PDF certificate authorizing you to sell prints of my models for as long as you're subscribed to the Obsessor tier.

It does not require an AMS or similar color changing system to get the colored effect. The pictures displayed were done using the color swap method.

There are two different prints available. You can print a stand or you can print a badge.

The Display2.stl model is meant to be glued in both Display1.stl and Display_Simple.stl. It's keyed so it can only be inserted in one direction.

Printing Instructions:
The 3mf file was created using Bambu Studio and has the following settings already configured.

Layer height: 0.2mm
Supports: Nope!

Display1.stl
- Add pause or color swap at layer 16 to change filament colors

Display2.stl
- Add pause or color swap at layer 10 to change filament colors

Display_Simple.stl
- Add pause or color swap at layer 26 to change filament colors

Feel free to join my discord for additional support, questions, or suggestions!