Slotted Cubby Insert for Phone Mounts (Ford Maverick '24)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ford Maverick cubby insert for use with air vent phone mounts
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 122
- Wydruki
- 3
- Wyświetlenia
- 557
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I could not find a good free model of a phone mount cubby insert for my Ford Maverick so I designed my own using the 3-D scan data uploaded by https://www.printables.com/@jalcober_222386 .
Print face down using PETG or other high temperature polymer (PLA will warp on a hot day).
Remove rubber mat from bottom of the cubby and push the insert into the cubby. It should fit snugly and sit beyond the cubby bezel which will keep it locked in place.
Install your favorite air vent phone mount. I have tried these two:
https://www.amazon.com/dp/B0CFQS5P4P?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1
https://www.amazon.com/dp/B0CQPHLQYH?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1
To remove the insert gently push down on the cubby bezel and pull the insert forward using the installed phone mount.