1 / 1
Anti Vibration Foot Pad Isolator Rubber Bumper for Air Compressors, Generators, Pressure Washers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a pair for my DeWalt air Compressor, I had a spool of TPU so I made one.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I needed a pair for my DeWalt air Compressor, I had a spool of TPU so I made one.
Printed it 40% infill
Here are the settings I used :
Printing speed = 30mm/s
Travel Speed = 200mm/s
Nozzle = 215°C, bed 30°C
Retract = 2.8mm
Retract Speed = 40mm/s
Unretract Speed = 20mm/s
cooling = 80%
No Z-Lift