Altoids Tin Sorry!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Miniature Sorry! board game that fits in an Altoid's tin
- Ocena
- 0 / 5
- Polubienia
- 67
- Pobrania
- 96
- Wydruki
- 1
- Wyświetlenia
- 1099
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A miniature version of Sorry! that fits in a regular Altoid's tin to kill time at conventions and while traveling. Details will be best if you have a .2mm nozzle for FDM printers for the board (my model was with a .4).
I included a set of 3D Printable cards, but I would recommend printing off a set on paper and cutting them out. You can also use a standard deck of cards with the Kings being the Sorry!'s if you take out the 6's and 9's and use a Joker for the extra 1.
The cards and card slot in the tin are ⅓ the size of normal Sorry! cards (normally 2.5"x3.5"). A standard deck has 4 of each card and 5 1's, and you'll need to print 16 pieces in 4 different colors to play. I recommend printing the simplified set of pieces; the fancy set matches the original game pieces but requires a smaller nozzle or resin printer to make.
Generic Tin if your local convenience store is out of strong mints.
Filament Companies That Support Me:
FlashForge: PLA/PETG/ASA/CF Filaments
Included links are Amazon Affiliate links. If you choose to purchase through these, they will support my projects at no cost to you.