Simple Fairphone 6 Bumper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I could not buy a bumper, so I made one.
- Ocena
- 4 / 5
- Polubienia
- 13
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 978
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
Please read carefully!
Features: The corners have a little air inside to damped impact when phone is dropped. Also the screen is not covered by the gripping corners. The version with the cutout I eyeballed and it might not fit perfectly to the accessories available by Fairphone.
Print Settings:
Layer height: 0.25mm
Bottom/Top Layer: 3 (remove bottom layers on printbed with modifier for added texture)
Used filament: Generic FLEX (I used SaintSmart TPU)
Used printer: MK3S+
Tolerance: The model has 0.15mm space between phone and model. If your printer is better or worse, use the .f3d file, go to parameters and change it.
Final actions: Remove the support in speaker and USB-slot with flush cutters.
Updates:
2025-06-30: The camera cutout is slightly off in the pictures, but fixed in the model already.
2025-06-31: Increased bottom thickness from 1.75mm to 2mm.