Liczymy pasujące modele…
Since there are no replacement buttons available for the Fairphone 6 - and the original button is hard to access - I designed this drop-in replacement. It fits well, feels almost identical to the original, and installs without opening the…
Pretty much the same blueprint as the original from bauersimon, minus the "FAIRPHONE" lettering. I also adjusted the dimensions a little and added a version where I removed the thin layer of filament that separates the Quadlock adapter…
Unfortunately Fairphone 6 volume buttons are prone to breaking and are not provided by the company for own replacement. The buttons are hidden under a seal that is also prone to leaking when the button cracks, so it is impossible to get…
Back cover for the Fairphone 6 with integrated Quadlock adapter. Compatible with the official case for the Fairphone 6 (see picture).
Back cover for the Fairphone 6 with integrated holder for the Plaud Note Pro. Compatible with the official case for the Fairphone 6 (see picture).
I updated this with slightly thicker walls, and beefed up the bottom wall. It was quite weak do to the holes and thin bottom. Print the case in PET-G for toughness. The stand folds with plastic hinges, so they last for a while but not…
Fairphone 2 Stand Passive Amplifier You'll need 2 x 3 mm magnets with 2 mm depth (1 for the body and 1 for the door)
I was inspired by the other fairphone 5 case models here. Especically https://www.printables.com/model/731965-best-fairphone-5-case-standard and https://www.printables.com/model/588836-fairphone-5-cases But I wanted it a little bit…
Just a taller slightly thicker version of the original, with added buttons, because I wanted to use Flex filament. The button cutouts also help retaining the phone in the mount. Category: Mobile Phone
Few Fairphone 3+ cases. I made them from Flexfill 98A and they are very pliable. I was impresses how well this flexible filament is, strong and malleable - it takes a while to sort out the extruder idler preload. For me on my MK3S+, 1…
It all started with the Faiphone3+, then I needed to keep my Nokia6.1 alive 'cause the OLG lottery app wouldn't work on the Fairphone, then my kid wanted one for the Pixel3a. The stands will work with some phone sleeves. Although they are…
There is two version: - The normal one to glue directly to the back of the phone with glue - The multipart one, where there is a 0.2mm “channel” to place double sided tape Printing: I recommend printing in PETG if you want a polished…
mount for 30mm handlebar. Added round slot to add rubberpad (round ~10mm*3mm) for better grip of the phone holder The Fairphone 3 holder: https://www.prusaprinters.org/prints/36625-fairphone-3-bike-mount-removeable
TPU cases for Fairphone 4. PLEASE NOTE: Optimised for a 0.3mm nozzle. Adjustment may be desired for a different nozzle size. You may need to thicken the case to about 103-104% in the thickness axis (usually Z-axis) in your slicer for it…
The first design (dummy) was created by Paperpilot and was discussed here . I have remixed the design from Warc , adapted it and made it ready to print. Thank you for the work. I moved a few things around until it fit for me. From that I…
A skadisnut mounted holder for my Fairphone 3 to mount to to SKADIS board. Hope you can use it.
Print instructions Print the camera bump separately, and glue it to the case Print the first layers in PLA, change to TPU for the last 2 layers of the bottom plate. The two materials bond very well and can't be separated (eSUN PLA+ and…
Please read carefully! Features: The corners have a little air inside to damped impact when phone is dropped. Also the screen is not covered by the gripping corners. The version with the cutout I eyeballed and it might not fit perfectly…
Required Materials: 5x 10mm M2 Self Tapping Screws 2x 6mm M2 Self Tapping Screws 2.0mm Pitch Battery Blade Connectors I used these: aliexpress.com/item/1005007786923022.html Single-Cell Powerbank PCB…
Backplate with included Garmin mount. I will create some more Plates for this Phone soon Use of PETG, ASA or ABS is highly reccomended. Resin Print is also possible Layerhight 0.1 100% infill full supports inner side of the Model on the…
Basic 3D-printable replacement back plate for the Fairphone 6, optimized for printing with improved tolerances, no supports required, and a secure fit. Ideal for customization.
Change the infill pattern as you want. Printing Base model Infill pattern: any Layer height: 0.2mm Material: TPU Wall count: 3 Solid top/bottom layer: 4 Custom pattern Same as base model except: Infill pattern: any continuous (avoid…
Hand measured 3d model of the Fairphone 6. Can be used to design cases, accessoires, etc.. Dimensions should be pretty accurate.
I found other cases to be a bit bulky and printing TPU is always a bit of a pain, so i made this slim, lightweight PLA case. It's 12g and can be printed without supports (i do use organic supports for the speaker cutouts though). No…
Adjusted for Fairphone 5 size (Phone with FP case)
This is a second generation remix of the excellent work of Paperpilot 88 , adding some space to house a QI charging pad inside the bumper. Using that, the Fairphone4 is upgraded to QI charging :-) To make space, the back of this cover has…
Required Materials: 6x 8mm M2 Self Tapping Screws 1x 3mm M2 Self Tapping Screws 2.0mm Pitch Battery Blade Connectors I used these: aliexpress.com/item/1005007786923022.html Single-Cell Powerbank PCB…
Banknote holder for Fairphone 6. It allows to securely store banknotes inside The Fairphone Card Holder. Model needs to be glue, I recommend doing it as follows: Align both parts. Tape them together as on photos. Open holder using tape as…
This is a remix of CyberCyclist's bike phone holder for iPhones made to fit a Fairphone 6 without a case. The fit is snug and the phone is very secure inside of it, I tried thrashing it about as much as I could and it never fell out. For…
I printed the case made by Tig3rch3n, but I thought there was room for improvement, so I re-made it. It is also snap fit, and the holes should be a little more aligned. You can print it with an infill pattern (and no top and bottom layer)…
A funky design case for the Fairphone 4 (and 5). Please use the 3mf file which has been pretuned for a good print. The giraffe pattern and stripes isn't in the model file (which is plain), but applied using PrusaSlicer modifiers and gives…
This custom case is designed to integrate a Meshtastic T114 board seamlessly with the Fairphone. It provides a compact, reliable housing with support for an external SMA antenna connector, an internal 3000 mAh battery, and GPS…
Remix of the Fairphone 5 Standard Case with honeycomb style holes underneath
Protect and personalize your Fairphone 6 with this set of 3D-printable cases, carefully refined over multiple iterations for a snug fit and a comfortable, grippy feel. Models included Flat: Simple, smooth and minimalist—quick to print and…
A case for the Fairphone 5 battery. I made two variants. One which is more stable (but also more bulky) and one that is a bit slimmer (my favorite). Made with FreeCAD.
Remixed Fairphone 6 case with integrated PopSocket insert
Made this case for my FP5 and printed it out of TPU (3DJake TPU A95). I've had it for 1.5 years and it's still doing its job perfectly! TPU prints are highly dependent on your machine/filament, so here's only the STL. You can print it…
The little hooks from my original Fairphone 5s back cover have been breaking off one after another: So I designed a replacement that is also removing the camera bulge. Printing Instructions I used PETG for the part, as it is rugged,…
A replacement for the Removable Volume buttons of the Original Farefone-6 Case, in case you loose it, like i did :D
Bumper case for Fairphone 6 (Fairphone Gen. 6) with cutout for custom back covers and more freedom around the fingerprint sensor. Derived from https://www.printables.com/@ArchibaldMcS_2501143 FP6 cover:…
Since there are no replacement buttons available for the Fairphone 6 - and the original button is hard to access - I designed this drop-in replacement. It fits well, feels almost identical to the original, and installs without opening the…
Pretty much the same blueprint as the original from bauersimon, minus the "FAIRPHONE" lettering. I also adjusted the dimensions a little and added a version where I removed the thin layer of filament that separates the Quadlock adapter…
Unfortunately Fairphone 6 volume buttons are prone to breaking and are not provided by the company for own replacement. The buttons are hidden under a seal that is also prone to leaking when the button cracks, so it is impossible to get…
Many thanks to funny0facer for the FreeCad file! It fits perfectly. With FreeCad it was very easy to adapt everything to my needs. Feel free to customize. I wanted to put the Quadlock mount direct on the phone, so that it is thinner as if…
Combined the FP5 with FP case holder and the Basic OpenGrid bare snap. Printed Upright with only bed support to support the snap.
Combined the FP5 without a case holder and the Basic OpenGrid bare snap to use in my office next to my screen.
Back cover for the Fairphone 6 with integrated Quadlock adapter. Compatible with the official case for the Fairphone 6 (see picture).
Intro Long long time ago I've made a bike mount for the Fairphone 3 , but since I use a protective case (bumper) it was not practical enough, because with protective case it would not fit in. So I've made a new one, but this time with a…
Back cover for the Fairphone 6 with integrated holder for the Plaud Note Pro. Compatible with the official case for the Fairphone 6 (see picture).
I updated this with slightly thicker walls, and beefed up the bottom wall. It was quite weak do to the holes and thin bottom. Print the case in PET-G for toughness. The stand folds with plastic hinges, so they last for a while but not…
I needed a bike mount for my Fairphone so I can chase those Strava records... I printed it in PLA upside down with traditional supports on the build plate only, but it can probably be printed on its open edge too, saving support material.…
Aloha, Da mir die im Netz verfügbaren Varianten alle nicht gefielen, passgenauigkeit etc. habe ich in Mühsamer kleinanstarbeit eine eigene Batteriefachabdeckung fürs Fairphone GEN.6 entworfen. Innen mit 42mm Aussparung für ein FLOVEME…
Work in progress It does fit (with little physical corrections), i have to do some little adjustments - will do it soon - Print in structural 0,2 mm layer optimized for PETG with supports (overhang) -- material PLA For easy remove ?!…
i liked the form of the cover, but the shapes not so much. So i remixed the original one.
A simple protective case for your beloved e-reader, featuring a special slot for a MagSafe magnet. And attach to your Fairphone 6! If you want read at night, use my ClickLight case! ClickLight! And attach and deatch!
This lets you mount your Fairphone 3 (FP3) in your car snapping onto an existing car mount. There are two versions, depending on if you intend to use the rear facing camera or not. Print Settings Rafts: No Supports: Yes Resolution: 0.15…
A cover for the Fairphone 2. The bottom part comes in two different versions - with a silly logo and a clear one. If you want to make your own version feel free to use the .blend file. The two halves keep together with a little (kind of)…
enlarged the aperture facing the USB port, to accept larger plugs added a shallow pocket for the card printed in PC blend. fits very tightly. I doubt it will come off without cutting it.
Introduction This robust tripod mount for the FP3 can be used in landscape and portrait orientation. It is intended to be used with the FP3 bumper in place, allowing access to all connectors and buttons while in use. The frame can take…
TPU phone case for Fairphone 4. Print tips: I reduced the thickness of the back case to 0.6 mm (2x0.3mm layers) 0.6mm nozzle I stretched the model in the z-axis to 103%
A snug-fit Fairphone 4 holder. It can even hold the phone in upside down! Non-Commercial use only. Feel free to remix it, and attach it to other models for your own use. Contoured for the Fairphone 4 for a perfect fit (even with a screen…
Inspired by the Fairphone designaday ( http://designaday.fairphone-open.com/ ) I designed some cases for the Fairphone. I hope you like it. Let me know in the comments what Ideas you would like to see for the case of your Fairphone.…
Inspired by the Fairphone designaday ( http://designaday.fairphone-open.com/ ) I designed some cases for the Fairphone. I hope you like it. Let me know in the comments what Ideas you would like to see for the case of your Fairphone.…
Inspired by the Fairphone designaday ( http://designaday.fairphone-open.com/ ) I designed some cases for the Fairphone. I hope you like it. Let me know in the comments what Ideas you would like to see for the case of your Fairphone.…
Inspired by the Fairphone designaday ( http://designaday.fairphone-open.com/ ) I designed some cases for the Fairphone. I hope you like it. Let me know in the comments what Ideas you would like to see for the case of your Fairphone.…
Inspired by the Fairphone designaday ( http://designaday.fairphone-open.com/ ) I designed some cases for the Fairphone. I hope you like it. Let me know in the comments what Ideas you would like to see for the case of your Fairphone.…
Inspired by the Fairphone designaday ( http://designaday.fairphone-open.com/ ) I designed some cases for the Fairphone. I hope you like it. Let me know in the comments what Ideas you would like to see for the case of your Fairphone.…
This is a stand for a Fairphone 3 with its rubber case on. If you decide to add a charging cable it automatically plugs in your phone too. Category: Office
Remix of that case: https://www.thingiverse.com/thing:5201496 Added a right to repair logo and widen the camera hole.
Bigger Audiojack, bigger Fingerprint Sensor hole also made minimal taller. Timelapse:
Thanks to the Fairphone 3 Dummy of @Tig3rch3n I've made a bike mount. The upper part is removeable so maybe someone could adjust the clamp for other bikes or create a car mount or a desk stand. The lower part is fixable with cable ties,…
Thanks to the Fairphone 3 Dummy of @Tig3rch3n I've made a desktop stand for the Fairphone 3 with amplifier. v.3: Added basement for USB-C-Adapter, I used Goobay 55556 USB-C 90° adapter Bigger amplifier Print instructions Category: Mobile…
Intro Fairphone 4 bike mount for 4 Quick Fix System adapter. Fairphone sits tightly. I've used the Simple 4 Quick Fix Worldwide Mount Plate made by @RoboMagus (thank you!) and fused it into my bike mount. I bought this cheap QuickMOUNT…
This is a customized design for the Fairphone 3 Bumper. You can clip in a back plate with your own design. A blank one is included. I also upload more back plates, so don't forget to check out my latest ones (-; Print instructions I tried…
Backplate for my Fairphone. Use with my customized fairphone bumper. Print instructions All single STLs fit together to the shown picture of bowser. This print is made with a single-nozzle-printer. I made a good experience printing it…
Backplate for my Fairphone. Use with my customized fairphone bumper. Print instructions All single STLs fit together to the shown picture of bowser. This print is made with a single-nozzle-printer. If you can access a multi-filament…
Backplate for my Fairphone. Use with my customized fairphone bumper. Print instructions All single STLs fit together to the shown picture of bowser. This print is made with a single-nozzle-printer. If you can access a multi-filament…
I wanted to have a nice and simple Phone dock for my Fairphone 4. I printed it with "wooden" filament which came out pretty nice in my opinion. I have also use a homeassistant manged power switch, which does only toggle on, if the battery…
I developed this rearcover by scanning-measuring. Just because the original one start to develop some cracks after some time. Unfortunately, installing this rearcover you will lose the NFC antenna, which is glued on the original…
A modification of the original rearcover. This one has increased thickness, and will lay flat on the table, whithout the cameras sticking out at the back. This one will print in place, and no gluing is required.
A simple smartphone stand designed to fit the Fairphone 4, but it might also fit other 6,3"-sized smartphones. The geometry is optimized for 3d-printing, therefore no support material and no post-processing is needed. The rest has a…
Case, case with card cut out, bumper I have made 3D files of the phone both with cutouts and without to use for other projects.
This is a (with OpenScad) customizable case for the Fairphone 5. It is meant to be printed with TPU, but I added a version of the bumper which can be printed with PLA. You might need a hair dryer to fit the PLA bumper to the phone. I…
Due to the current lack of available Acessoires for the new Fairphone 5, i decided to develop a Case for the Phone to fit my needs. This case is extremely massive! I developed this case for the hard usage in my metal workshop. It has a…
Intro Fairphone 5 bike mount for 4 Quick Fix System adapter. Fairphone sits tightly. I've used the Simple 4 Quick Fix Worldwide Mount Plate made by @RoboMagus (thank you!) and fused it into my bike mount. I bought this cheap QuickMOUNT…
Don t forget support on the bridge at the buttons Original plastic cover on the backside can be removed The climber looks cool but is not so stable Original Fusion360 file to customize or improve the cover
This is a bumper case for the FairPhone 4. It is designed to add minimal size to the footprint and still provide ample protection against drop damage. I've been using it for 6 months now and dropped it several times, no damages so far. It…
![Fairphone 4 Rearcover [default]](https://media.printables.com/media/prints/564339/images/4520460_dbca6ec0-fc2f-4951-9e65-fc25b66dcd1d/2023-08-26_17-34-31.jpg)
![Fairphone 4 Rearcover [flat]](https://media.printables.com/media/prints/564354/images/4520752_9a8360e2-b316-4503-bb44-a6bc0fc8798e/untitled9.jpg)
