Fairphone 4 / smartphone stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple smartphone stand designed to fit the Fairphone 4, but it might also fit other 6,3"-sized smartphones.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 229
- Wydruki
- 3
- Wyświetlenia
- 1014
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple smartphone stand designed to fit the Fairphone 4, but it might also fit other 6,3"-sized smartphones. The geometry is optimized for 3d-printing, therefore no support material and no post-processing is needed. The rest has a slightly wider gap than the thickness of the FP4 if you're using a phone bumper. There's also space to attach a charging plug, however smaller plugs are preferred.
The .3mf-file contains a setup where the base plate is printed with 100% infill to make it heavier than the upper part.
Model designed in Rhino.
Toolpath of the model exported with PrusaSlicer.
Images rendered in Blender/Cycles.
Print Settings
Printer: generic
Rafts: No
Supports: No
Resolution: 0.3 mm
Infill: 25%
Filament: PLA
Notes:
Printing orientation is already set up in the STL-file. You might want to add a small brim for better bed adhesion.