Fairphone FP3 car mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This lets you mount your Fairphone 3 (FP3) in your car snapping onto an existing car mount. There are two versions,…
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 332
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This lets you mount your Fairphone 3 (FP3) in your car snapping onto an existing car mount. There are two versions, depending on if you intend to use the rear facing camera or not.
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
0.15
Infill:
20%
Filament: extrudr Greentech Pro silver
Notes:
For improved layer adhesion, print with 0.15 mm layer height and 0.6 mm line width on a 0.4 mm nozzle.
Make sure to choose material that can withstand the temperatures in your car, your standard PLA will start deforming at or even below 60°C.Post-Printing
Snap onto the existing mount with care. If tolerances are too tight, use a needle file where necessary. Check regularly to not introduce too much slack.
Category: Mobile Phone