Fairphone FP3 car mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This lets you mount your Fairphone 3 (FP3) in your car snapping onto an existing car mount. There are two versions,…
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 25
- Makes
- 1
- Views
- 332
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This lets you mount your Fairphone 3 (FP3) in your car snapping onto an existing car mount. There are two versions, depending on if you intend to use the rear facing camera or not.
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
0.15
Infill:
20%
Filament: extrudr Greentech Pro silver
Notes:
For improved layer adhesion, print with 0.15 mm layer height and 0.6 mm line width on a 0.4 mm nozzle.
Make sure to choose material that can withstand the temperatures in your car, your standard PLA will start deforming at or even below 60°C.Post-Printing
Snap onto the existing mount with care. If tolerances are too tight, use a needle file where necessary. Check regularly to not introduce too much slack.
Category: Mobile Phone