Fairphone 6 Case - no TPU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple, stylish case for the Fairphone 6. Pla/Petg recommended. Backside patterns = Infill + 0 Top/Bottom layers
- Ocena
- 4,75 / 5
- Polubienia
- 25
- Pobrania
- 226
- Wydruki
- 7
- Wyświetlenia
- 1143
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
I found other cases to be a bit bulky and printing TPU is always a bit of a pain, so i made this slim, lightweight PLA case. It's 12g and can be printed without supports (i do use organic supports for the speaker cutouts though). No button gets covered. Pretty much every edge is chamfered, as to not feel too sharp on the hands.
PLA/PETG recommended. TPU will probably turn out too flimsy.
To get patterns on the backside:
set Top/Bottom layers to 0.
Recommended patterns: Honeycomb, Gyroid
Depending on your printers accuracy you may need to scale the model a tiny, tiny bit (like +/- 0.1%) to get it to fit snug.
Any issues, suggestions or comments, let me know pls
edit:
New Version V2 with a much bigger charging port cutout. Now every charger should fit.
edit 2:
Added smooth version without the grip