1 / 2
FractalDesign Ridge low high feet. — zdjęcie 1
1 / 2

FractalDesign Ridge low high feet.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small feet for horizontal placement of the pobular SFF Case FractalDesign Ridge as a living room PC.

Ocena
0 / 5
Polubienia
5
Pobrania
32
Wydruki
0
Wyświetlenia
372
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I want a console-style computer for the living room, so the Fractal Design Ridge case is just what I need.

But the original stand for the horizontal position is not very nice and too high for my taste.

That's why I had a quick go at CAD and designed a stand at a lower height.

I attached the feet with double-sided adhesive tape and attached furniture glides at the bottom, which you can buy anywhere.

The diameter of the furniture glides should be no more than 20mm.

There is no special setting for printing.

I simply used PETG with 0.2 mm layer height and 3 perimeters and infill about 10% Adaptiv Cubic. But PLA should also work without problems.

 

Please leave a feedback and happy printing!

Tagi