1 / 2
FractalDesign Ridge low high feet. — image 1
1 / 2

FractalDesign Ridge low high feet.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Small feet for horizontal placement of the pobular SFF Case FractalDesign Ridge as a living room PC.

Rating
0 / 5
Likes
5
Downloads
32
Makes
0
Views
372
Reviews
0

Updated at source:

Model information

Category
Living Room
License
Creative Commons — Attribution — Noncommercial — Share Alike

I want a console-style computer for the living room, so the Fractal Design Ridge case is just what I need.

But the original stand for the horizontal position is not very nice and too high for my taste.

That's why I had a quick go at CAD and designed a stand at a lower height.

I attached the feet with double-sided adhesive tape and attached furniture glides at the bottom, which you can buy anywhere.

The diameter of the furniture glides should be no more than 20mm.

There is no special setting for printing.

I simply used PETG with 0.2 mm layer height and 3 perimeters and infill about 10% Adaptiv Cubic. But PLA should also work without problems.

 

Please leave a feedback and happy printing!

Tags