DXC Extruder - Compatible Cable Mount for Creality K1c

📐 Description

This is a custom cable mount designed for the Creality K1C when used with a DXC Extruder mod.
The DXC extruder raises the extruder motor significantly, which causes collisions with the stock cable mount — this part solves that problem.

Key modifications:

Increased height from 20mm → 30mm

Reduced width from 10.5mm → 8.5mm

Now fully clears the motor in all Z positions

Fits both K1C bed types — with or without silicone cleaning brushes

🛠 Compatibility

Creality K1C (probably others K1 family, not tested)

DXC Extruder mod

🔩 Hardware

Uses standard Creality screws

Requires 2x M3 (3mm) heat-set inserts

🖨 Print Instructions

Print Orientation: Use the default model orientation

Supports: No external supports needed — embedded breakaway supports are included and can be cut with snips

Layer Height: 0.2mm recommended

Wall Count: 4 or more for strength

Infill: 100%

Brim: Optional, depending on bed adhesion (I didn't need it, but your experience may vary)

🧵 Material Requirements

Better print  in PETG, ASA, ABS, or Nylon.

Not suitable for PLA, because of long term temperature exposure.

📁 Fusion 360 Source

Editable model (mostly parametric):
https://a360.co/44sot7y