DXC Extruder - Compatible Cable Mount for Creality K1c
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a custom cable mount designed for the Creality K1C when used with a DXC Extruder
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 84
- Makes
- 0
- Views
- 658
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Public Domain
📐 Description
This is a custom cable mount designed for the Creality K1C when used with a DXC Extruder mod.
The DXC extruder raises the extruder motor significantly, which causes collisions with the stock cable mount — this part solves that problem.
Key modifications:
Increased height from 20mm → 30mm
Reduced width from 10.5mm → 8.5mm
Now fully clears the motor in all Z positions
Fits both K1C bed types — with or without silicone cleaning brushes
🛠 Compatibility
Creality K1C (probably others K1 family, not tested)
DXC Extruder mod
🔩 Hardware
Uses standard Creality screws
Requires 2x M3 (3mm) heat-set inserts
🖨 Print Instructions
Print Orientation: Use the default model orientation
Supports: No external supports needed — embedded breakaway supports are included and can be cut with snips
Layer Height: 0.2mm recommended
Wall Count: 4 or more for strength
Infill: 100%
Brim: Optional, depending on bed adhesion (I didn't need it, but your experience may vary)
🧵 Material Requirements
Better print in PETG, ASA, ABS, or Nylon.
Not suitable for PLA, because of long term temperature exposure.
📁 Fusion 360 Source
Editable model (mostly parametric):
https://a360.co/44sot7y