1 / 8
Spacer Ring to move the primary mirror closer to secondary mirror - Skywatcher Newton Skyliner 200 P (8") — zdjęcie 1
1 / 8

Spacer Ring to move the primary mirror closer to secondary mirror - Skywatcher Newton Skyliner 200 P (8")

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spacer Ring to increase backfocus by bringing the primary mirror closer to the secondary mirror, Skywatcher 200mm/8"

Ocena
0 / 5
Polubienia
3
Pobrania
17
Wydruki
0
Wyświetlenia
351
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Increasing the backfocus by bringing the primary mirror closer to the secondary mirror with a Skywatcher Newton Skyliner 200 P.  [ 200 mm / 8" ]

In my case, I could not reach the focus point when using a Baader Clicklock, which is about 18 mm wider than the Skywatcher clamp (30 mm/ 12 mm). In addition, the tube of the focuser is intruding into the light path.

Suitable for

This model was done for modifying a Skywatcher 203/1200 Skyliner-200P Dobson. I do not own a Explorer 200/1000 PDS or a Quattro 200/800 but I think the bottom parts ar a little bit different - at least if compared to my Explorer 150/750 PDS which has ribbed screws.

This model will only fit if the mirror adjustment is done by Phillips screws and set screws.

Be aware of the size of the secondary mirror when moving the primary mirror (Illumination of the field)

 

Sizes

Model files with spacer ring thickness of 5 mm, 10 mm, 15 mm 20 mm and 25 mm are available.
The FreeCAD model file is published too for customization the thickness to your needs.

It is also possible to scale the model in Z-direction to the thickness you requirement.

Part list

  • Spacer Ring
  • 3 O-Rings (Original)
  • 3x Countersunk head socket cap screws ISO 10642 (DIN 7991) M5x30 mm (15 mm + thickness spacer ring)
    • Spacer Ring  5 mm: M5x20
    • Spacer Ring 10 mm: M5x25
    • Spacer Ring 15 mm: M5x30
    • Spacer Ring 20 mm: M5x35
    • Spacer Ring 25 mm: M5x40
  • 3x Screws M5x16mm, several types will do it, but it is recommended to use Countersunk head socket cap screws ISO 10642 (DIN 7991) too - so only one tool is needed for mirror adjustment (hexagon wrench, same size).

Printing

Don't be surprised about the small holes, they were added to get walls in the area of the screw which is pressing to the spacer ring.

Nozzle 0.6 mm, layer height 0.3 mm, no brim, no support. 3 wall lines, 4-5 bottom layers, 3 top layers. Infill triangles, density 15% (or more) - it's best to adjust the density so that infill gets bonded on the wall lines of the small holes.

Nozzle 0.4 mm and layer height 0.2 mm is of course possible. Increase wall lines to 5 and 6-7 bottom layers.

Assembly

See pictures. Don't forget the O-Rings.

 

If you need a primary mirror mask / aperture mask like in the pictures, you can find one here:

https://www.printables.com/model/1314579-aperture-mask-primary-mirror-mask-for-newton-skywa

 

Updates

  • Update 04.07.2025: Spacer Ring 20 mm added 
  • Update 22.07.2025: Spacer Rings 5 mm, 10 mm and 25 mm and information about required screws per ring thickness added.

 

-------------------------------
The only reward for a hobbyist is likes.

Support / Donation for my work

Tagi