Spacer Ring to move the primary mirror closer to secondary mirror - Skywatcher Newton Skyliner 200 P (8")
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spacer Ring to increase backfocus by bringing the primary mirror closer to the secondary mirror, Skywatcher 200mm/8"
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 353
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- GNU General Public License v3.0
Increasing the backfocus by bringing the primary mirror closer to the secondary mirror with a Skywatcher Newton Skyliner 200 P. [ 200 mm / 8" ]
In my case, I could not reach the focus point when using a Baader Clicklock, which is about 18 mm wider than the Skywatcher clamp (30 mm/ 12 mm). In addition, the tube of the focuser is intruding into the light path.
Suitable for
This model was done for modifying a Skywatcher 203/1200 Skyliner-200P Dobson. I do not own a Explorer 200/1000 PDS or a Quattro 200/800 but I think the bottom parts ar a little bit different - at least if compared to my Explorer 150/750 PDS which has ribbed screws.
This model will only fit if the mirror adjustment is done by Phillips screws and set screws.
Be aware of the size of the secondary mirror when moving the primary mirror (Illumination of the field)
Sizes
Model files with spacer ring thickness of 5 mm, 10 mm, 15 mm 20 mm and 25 mm are available.
The FreeCAD model file is published too for customization the thickness to your needs.
It is also possible to scale the model in Z-direction to the thickness you requirement.
Part list
- Spacer Ring
- 3 O-Rings (Original)
- 3x Countersunk head socket cap screws ISO 10642 (DIN 7991) M5x30 mm (15 mm + thickness spacer ring)
- Spacer Ring 5 mm: M5x20
- Spacer Ring 10 mm: M5x25
- Spacer Ring 15 mm: M5x30
- Spacer Ring 20 mm: M5x35
- Spacer Ring 25 mm: M5x40
- 3x Screws M5x16mm, several types will do it, but it is recommended to use Countersunk head socket cap screws ISO 10642 (DIN 7991) too - so only one tool is needed for mirror adjustment (hexagon wrench, same size).
Printing
Don't be surprised about the small holes, they were added to get walls in the area of the screw which is pressing to the spacer ring.
Nozzle 0.6 mm, layer height 0.3 mm, no brim, no support. 3 wall lines, 4-5 bottom layers, 3 top layers. Infill triangles, density 15% (or more) - it's best to adjust the density so that infill gets bonded on the wall lines of the small holes.
Nozzle 0.4 mm and layer height 0.2 mm is of course possible. Increase wall lines to 5 and 6-7 bottom layers.
Assembly
See pictures. Don't forget the O-Rings.
If you need a primary mirror mask / aperture mask like in the pictures, you can find one here:
https://www.printables.com/model/1314579-aperture-mask-primary-mirror-mask-for-newton-skywa
Updates
- Update 04.07.2025: Spacer Ring 20 mm added
- Update 22.07.2025: Spacer Rings 5 mm, 10 mm and 25 mm and information about required screws per ring thickness added.
-------------------------------
The only reward for a hobbyist is likes.
Support / Donation for my work