Counting matching models…
Skywatcher Newtonian 8" (200mm) 1200mm main Mirror Mask for "hiding" the mirrorclamps and get better starts print it with 100% infill and paint it in the mattest black you can find. dont overtighten the mirrorclamps to not get…
I lost the original cap for my SkyWatcher Explorer 130 Telescope so designed this one. Print it from TPU, no supports needed
Slimmed down the flat part of the original design by about 30%, it cuts an hour off the print time.
None of the different counterweights tell you what diameter of bar thaty are intended for, I bought a Sky-Watcher 11-Pound Counterweight for AZ-EQ6 for my AM3 because ZWO doesn't sell a counterweight, turns out it has a different diameter…
1. Introduction Présentation de la tablette spécialement conçue pour être compatible avec divers trépieds, incluant les modèles Star-Adventurer, AZ GTI, et AZ Pronto. 2. Compatibilité Détails sur la compatibilité avec différents trépieds,…
I made these models to use with MyFP2ESP32Focuser, a DIY focuser that can be used with NEMA17 motor Update (30th April 2026): I ditched the old design which still used the Crayford design and made the whole camera assembly slip under…
see the update at the end. Supports for the EQ6 R pro . Tested on soft ground (sand ground and grass), ceramic floor with relief and sandstone floor, improving stability, accidental slippage and preserving the ceramic floor. Optionally,…
This type of mount allows you to attach your focuser motor directly to a tube. Designed for ~170mm tubes. This type of connection is extremely easy to print out of PETG and it's nearly indestructible. Clamping is done via M4 bolt, nut and…
You want to attach an additional guidescope to your scope without drilling new holes? All slots are occupied? Clamps to the rescue! You can't have too many clamps on your telescope. This is very fast and easy to print clamp that can be…
The strings are used from commonly available AA battery holders. They are fixed in the holder with rivets.
Counterweight rod adapter for Skywatcher 18mm counterweight and Skywatcher counterweights with 26mm hole. Category: Hobby
A top mounting plate for the SkyWatcher EvoGuide 50ED, allowing for guide scope, mini pc and focuser. The rings holding the telescope were originally purchased from craftology3d on ebay. The Pegasus Power box advanced is connected to the…
My kids telescope, a Skywatcher Explorer 130. Had it's focuser tubes rack break, the gears was stripped. So I looked at replacements on the market, as well as 3D printed ones. But no one fitted my kids telescope as is. So I started…
If you find my designs useful, please consider sending a tip Replacement accessory tray bracket for square legged Equatorial mount tripods (Meade 4500, older Celestron and Skywatcher EQ Tripods etc) Our astronomical society received a 5"…
Print Settings: Quality: 0.2 Infill: 40-60% Walls/Perimeters: 4-6 Brim: Yes (Personal Preference) Supports: Yes Material: PLA
Purpose First step when aligning an equatorial mount is a rough alignment of the rotational axis, polaris in the northern hemisphere. The more precise the better for next steps. With a laser beam exactly along the axis of rotation rough…
To allow for a faster setup and wrap up, it is tempting to leave the pier head attached to the mount, and leave the pier attached to the tripod. But that leaves the three thumbscrews potentially loose and exposed. The TopPack_V2 (white)…
Remixed the main button so it can be installed on a Skywatcher Crayford focus button. If you want really smooth operation, check out the anti-wiggle needle mod here:…
I created this bracket to fix a Omegon dew controllerbox to the tripod of a Sky Watcher EQ6-R equatorial mount.
Those tools will enable easy handling of all adjustmant and fixing screws on the new Skywather 150i mount head. Their size and thickness allow operations in both equatorial and alt-azimuth mode. The Saddle tool also fits on the dec. and…
This lets you attach an Arrow Antenna satellite yagi (normally handheld) to the Sky-Watcher AZ-GTi tracking mount used normally with telescopes. There is a center hole that can accept a ¼-20 or M6 threaded rod to help with strength. I…
Bathinovmask for Skywatcher 8" Newton Telescope
this is a fanholder for the 8" or 200mm skywatcher newtonian telescope. it works for fans with 92mm size you aditionally need: 3 x screw m3 x 12-16mm 4 x screw m3 x 30mm 1 x fan (12vdc) size 92mm the fanscrews are directly screwed in the…
This remix corrects a small bug where a curve in the finder mount obstructs the lip of the telescope (lordzurp is aware and is updating). BUT the real reason for it is to add a larger mount for a Crayford 1.25" focuser - 71mm base plate…
The stock focuser on the SkyWatcher Starquest 130p Newtonian telescope is quite basic and not ideal for astrophotography. It is relatively tall, leaving limited back focus when trying to achieve focus with a camera, and it can feel a…
Skywatcher Newtonian 8" (200mm) 1200mm main Mirror Mask for "hiding" the mirrorclamps and get better starts print it with 100% infill and paint it in the mattest black you can find. dont overtighten the mirrorclamps to not get…
They fly now? They fly now. I hope you have some arrows or are adept with the shield parry. If you are sneaky you can one-shot them with an ancient arrow to the top eye symbol. Or just the regular eye. This model is nicely over-engineered…
Design It's very difficult to get a Dew Shield for an 300 mm Newton Telescope (Skywatcher 300 PDS). But printing it is also not possible for much people because it would demand a 3D-Printer with a printable area of 400x400 mm. Therefore I…
Impression à l’aide des paramètres par défaut de votre slicer pour le matériau sélectionné (PLA ou PETG). Impression en PETG recommandée , pour une meilleure durabilité en conditions extérieures.
Guide-câbles pour monture équatoriale Sky-Watcher Ce guide-câbles permet un passage propre des connectiques entre les parties mobiles de la monture et son trépied. Fixation simple et démontage rapide grâce à l'utilisation de bandes…
Cache arrière pour Newton Sky-Watcher 200PDS Ce cache permet de protéger le miroir primaire des lumières parasites pouvant pénétrer par l’arrière du télescope. Il préserve également l'accès aux vis de collimation , évitant tout contact…
Design This dew shield / scattered light protection was designed for a Skywatcher 150 PDS (150/750 f5) but should also suite for a 150 P or even a 150 Quattro (f/4) as the diameter don't change between this models. The shield rests on the…
It is quite difficult to get a primary mirror mask / aperture ring for a 12" Newtonian (300 mm). That's why I designed a multi-part mirror mask for my Skywatcher 300 PDS Newtonian. I cannot say whether it is also suitable for telescopes…
A dew shield for the SkyWatcher Starquest 130p Newtonian telescope. Primarily designed to fit my custom secondary mirror spider for the 130p, but also works with the original. Printed with supports in between the two rings at the bottom.
When a main mirror mask is attached to the main mirror, the area between the rubber holders is lost. To reduce this area, it is necessary to print a redesigned mirror holder made of TPU with a smaller holder pad. One of the pictures shows…
Increasing the backfocus by bringing the primary mirror closer to the secondary mirror with a Skywatcher Newton 150 mm (6"). In my case, I could not reach the focus point when using a Baader Clicklock, which is about 18 mm wider than the…
Design The tube end ring is combined with the secondary mirror spider. In my opinion, it makes no sense to screw on the tube end ring and also the spider for a 3D-printed part. The mirror holder is centered by design, it is not possible…
Taking dark images with my Newtonian telescope in daylight with just the telescope lid on was impossible - the result was a very bright light and overexposed picture. When I investigated where the light was coming from, I found that it…
Simple cover for skywatcher newtonian telescope 150 mm (6") for use after colimating. Printing About 100 grams, PETG recommended, Nozzle 0.6 mm, Layer height 0.3 mm (even with a bambulab nozzle I can print PETG on nozzle 0.6 mm with flow…
It is recommended to add an aperture mask to cover the rubber holders. These protrude into the mirror surface area what you can see in the diffraction spikes on bright stars. Printing: ~ 25 grams, Nozzle 0.4 mm or 0.6 mm (usually faster),…
Simple cover for skywatcher newtonian telescope 200 mm (8") for use after colimating. Printing About 152 grams, PETG recommended, Nozzle 0.6 mm (usually [much] faster than 0.4mm nozzle), Layer height 0.3 mm. No support needed, wall loops…
Tray designed to hold a 60mm high precision level on a tripod with a Skywatcher Star Adventurer wedge.
The system is based on a double helical focuser like this: High Precision 1.25" Double Helical Focuser with Brass Compression Ring M42 T2 SCT Thread 2" Adapter for Astronomical Telescope…
I needed an aperture mask for my dobson so I made one. This is compatible with a dobson Skywatcher, 10inches diameter. This is the normal full white tube model. I don't know if this would work for the flextube series.
Spare part rubber for focusser wheel for a Skywatcher Focusser like on Dobson Teleskop N 200/1200 Skyliner Classic DOB. Diameter 40 mm, width 12 mm, FreeCAD model is available to adjust the size to your demand. Glue the rubber to the…
Increasing the backfocus by bringing the primary mirror closer to the secondary mirror with a Skywatcher Newton Skyliner 200 P. [ 200 mm / 8" ] In my case, I could not reach the focus point when using a Baader Clicklock, which is about 18…
Design The tube end ring is combined with the secondary mirror spider. The mirror holder is centered by design, it is not possible to adjust the center position of the mirror holder and therefore the mirror. The standard secondary mirror…
Supporto per alimentatore 12v/120w/10A. Adatto ad essere applicato alla gamba di un treppiedi Skywatcher Carbon Wave cod. SK-WAVE-TR o su gambe tubolari di diametro di 40mm La sezione dell'alimentatore usato è di 38.5x67mm Alimentatore di…
Mountable in dew shield (place of the dust cap). I tried only visually, it works with brighter stars well.
English I purchased a new TS-optics focuser for my skywatcher 200PDS, but when I installed it I found that it required 4 new holes positioned with precision and that the focuser would not completely cover the hole in the tube so there…
54 degree wedge designed to slip into the pilar of Skywatcher AZ-GTI tripod. Requires no additional hardware this way and makes very sturdy design. Lock thumbscrews into shaft, and use original 3/8 thumbscrew to mount AZ-GTI onto wedge/…
Same printing instructions as the original. No supports needed, print vertically for best strength.
This is my second attempt to create an adapter to fix the crappy focuser on the Heritage series of Skywatcher Telescopes. I was inspired by what was made on Dobsonian Power, but didn't like the compromise of the added length to the…
This is my second attempt to create an adapter to fix the crappy focuser on the Heritage series of Skywatcher Telescopes. I was inspired by what was made on Dobsonian Power, but didn't like the compromise of the added length to the…
I've used the excellent Eq6r levelling ring for about a year but when I got my Skywatcher pillar mount I was surprised to find it didn't fit. The column is narrower than the tripod so it needed a spacer I made an open collar that fits…
Nema 11 mount for focuser. BOM: Nema 11 motor. I have 28SHD4205-30Z. 4x M2.5 bolts GT2 16T wheel - motor GT2 32T wheel, bore 4mm - focuser closed loop belt 140mm
I did a quick edit to remove the phone holder. It was preventing a print without supports.
Skywatcher 150p Virtuoso secondary mirror holder with 58mm spacing between bolts for focuser. Maybe you can edit it for your focuser. For the secondary mirror you can use 3 heat inserts and the original hardware from the stock secondary…
I use 6V (you can go with 12V) 2200 mAh NiMH battery for RC cars (up to 75x55x17mm) to power my tracking system and primary mirror fan. Right now, it allows 4-hour-long imaging sessions (it doesn't drain the battery empty, I just never…
Thanks to the original author ( @Jannis483 ), it fits like a charm! I added the mount points for 2 small 30 mm fans. I used the 6 mm height version, but there's a 10 mm space if you want bigger coolers. Everything sits nicely and flush…
The adjustment screws stay accessible with this design. I also accounted for the curvature of the original screw cover. The curvature near the axis allows for 3d printed shaft couplers with longer screws. The center distance is 54mm __…
It is very well fitted to the evoguide 50. not too loose not too tight, just right.
One of first practical models I made. Polarscope fit in tightly, so there is no clacking, lid is just put on. Maybe I will upgrade model in the future, or anyone is free to remix. Jeden z prvních praktických modelů, které jsem vytvořil.…
Remix of this Omegon battery holder by [Cepadyes] – I tweaked the clamp so it fits my Skywatcher AZ-GTi . Keeps the power bank nice and snug on the tripod, no more dangling cables. Works great for me. 👍 Fits: Mount: Skywatcher AZ-GTi →…
I lost the original cap for my SkyWatcher Explorer 130 Telescope so designed this one. Print it from TPU, no supports needed
My SkyWatcher Wave 100i mount did not come with a holder for the hand controller. This model addresses that shortcoming. It is sized to fit the 40mm diameter legs of the SkyWatcher carbon tripod, but I have included the Fusion 360 file so…
Slimmed down the flat part of the original design by about 30%, it cuts an hour off the print time.
None of the different counterweights tell you what diameter of bar thaty are intended for, I bought a Sky-Watcher 11-Pound Counterweight for AZ-EQ6 for my AM3 because ZWO doesn't sell a counterweight, turns out it has a different diameter…
1. Introduction Présentation de la tablette spécialement conçue pour être compatible avec divers trépieds, incluant les modèles Star-Adventurer, AZ GTI, et AZ Pronto. 2. Compatibilité Détails sur la compatibilité avec différents trépieds,…
Adapting EQ5 (SkyWatcher) telescope mount or similar types to OnStep goto controller , by Howard Dutton project. Accessories recommended OnStep Mini 2.0 Cotroller and Box on base MiniPCB2 and Teensy3.2 or OnStep STM32 Controller and Box…
To attach a angle finder to the polar scope on SkyWatcher Star Adventurer and similar. The Sky Watcher Polar Scope Pentax Spotmatic.stl can be replaced by your own design so it fits your angle finder. This one fits the Pentax angle finder…
I made these models to use with MyFP2ESP32Focuser, a DIY focuser that can be used with NEMA17 motor Update (30th April 2026): I ditched the old design which still used the Crayford design and made the whole camera assembly slip under…
A simple and "good enough" replacement eyecup for skywatcher 1.25" eyepiece. Print with TPU.
wanted to get a more rigid secondary mirror spider, but all the ones available had weird mounting solutions like 5mm m8 bolts so i made this one with holes for m5 heat set inserts Category: 3D Printing
I was annoyed at the stock shiny focuser tube sticking out in front of the mirror so I made a shorter one which is about 70mm long so doesn't really stick out ever, i found its best to print it with the threads at the bottom and a…
removed the indent at the front to enable printing without the supports Category: Other
WARNING: NEVER LOOK DIRECTLY AT THE SUN THROUGH A TELESCOPE, BINOCULARS OR WITH YOUR UNAIDED EYE. This is a tool for a known problem: If your telescope has a sun filter (and it must have a sun filter for looking at the sun!), you can't…
For travel and transportation I put my EQ5 tripod in a slightly padded tripod bag. After a few flights, I saw that the pin on top of the tripod had damaged the bag from the inside. This cover protects the tripod top and the bag. It it…
I noticed my Skywatcher EQM-35 Pro had quite a bit of play between the mount head and the tripod. When polar aligning the azimuth adjustment screws would often just shift the whole head to the side rather than rotating it, making fine…
Idea A simple way to secure the tripod legs with velcro straps because they always tend to flop around uncontrollably. Design This is my first design done in Fusion 360. The original design I used as a reference had lots of supports to…
Customized version of https://www.thingiverse.com/thing:3968935 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3968935 Instructions Using the following options: focalLength = 420 aperture = 83 capDepth =…
Idea This model's idea is a rebuilt and (hopefully) improved version of: https://www.thingiverse.com/thing:3964197 While I liked the original model and for this version used most of its measurements, I had a few issues with it and even my…
I am owner of a Skywatcher Heritage 130p. Since I live in the city and like to use the telescope from the balcony, I wanted to protect the telescope mirror from stray light. I looked at some solutions in the relevant forums, but I wasn't…
The is my version of an Bahtinov Mask (created with AstroJargon) for my Skywatcher Teleskop N 150/750 PDS Explorer BD OTA. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20%…
SkyWatcher Heritage 150 - astronomy scope modification: motorizing the ALT/AZ axis for automatic pointing and star tracking, using the 3d printed parts, bearings and 2GT belts used commonly in 3d printers, adding the electronic for full…
Perfectly fit the polar scope for the Star Adventurer (mine is the mini version but they should be all identical). Print settings: Material TPU Use low infill to obtain a soft and squashy case No supports Suggested layer height 0,2mm
Print settings: Material TPU No supports Suggested layer height 0,2mm
This mounting block suits the Skywatcher (or Saxon) Mak 180 telescope, it attaches where the guidescope dovetail mount point. As this area is on the tube and slightly tapered and this block has a slight angle in the base to bring the…
This is an upgraded knob attachment for the Azimuth adjustment screws on the Sky-Watcher EQM-35 Pro telescope mount. This should allow more torque and finer adjustment for polar alignment. Remixed from:…
Auxiliary tray for the SkyWatcher EQ6 R pro mount. See: https://www.printables.com/es/model/304688-new-tray-for-the-skywatcher-eq6-r-pro-mount In case it can be useful, I leave you this tray, adapted to the tripod of the EQ6R pro. It is…
Using the same dimensions as the standard Skywatcher dustcap. The .stl is completely manifold and thus perfectly printable. tested settings with PETG: layer height: 0.3mm 2 perimeter shells infill: 20% no supports needed
This holder for the Skywatcher EQ-4 Dual Motor control unit can be attached to a tripod with cable ties. There are slots on one side to attach a USB power bank with cable ties as well. If you use velcro cable ties you can easily remove…
Was searching on the internet if there was an Polar Align mount which fits around the AZ GTI, and can hold a phone next to it parralel. There werent any. So i made this model, which fits around the house of the AZ GTI. On the side you can…
New version of the tray for the Skywatcher EQ6 R Pro mount, more rigid and with grooves. This tray can be mounted on any mount with a 2" diameter tube and an angle of 56°, to maintain horizontality. To prevent rotation on the polished…
see the update at the end. Supports for the EQ6 R pro . Tested on soft ground (sand ground and grass), ceramic floor with relief and sandstone floor, improving stability, accidental slippage and preserving the ceramic floor. Optionally,…
Dovetail for Skywatcher Maksutov 90/1250 to EQ-3 mount This dovetail was made specially for Skywatcher 90/1250 MC telescope and Skywatcher EQ-3 (EQ3-2 too) mount. I mean, I don't know if it fits other telescopes and mounts of other…
Bracket to hold Skywatcher EQM-35 tripod legs apart and rigid for transport. Should fit any tripod with 1.75" diameter legs. STEP file provided for much better surface finish if your printer and slicer support curves.
Remix of Wuggi's excellent EQ5/HEQ5 tripod leg transport clip to print it without supports. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution: Variable Infill: 10 Filament: C-Tech PETG Notes:…
