1 / 3
Ubiquiti Double 210W AC Adapter Rack Mount — zdjęcie 1
1 / 3

Ubiquiti Double 210W AC Adapter Rack Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Neatly secure your switches' giant 210W AC power bricks in your rack. Holds two 210W bricks.

Ocena
0 / 5
Polubienia
19
Pobrania
90
Wydruki
0
Wyświetlenia
579
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This printed part fits two 210W AC power adapters, used on switches like the USW Pro XG 8 PoE and USW Flex 2.5g PoE. I did not want the power bricks just sitting loose on the bottom of the rack, so I designed this mount that holds them neatly at the back side of the rack.

By default, this will mount at the left rear (right side when looking from the back of your rack), but can be mirrored in your slicer to fit either side. The part itself takes up 3U of mounting space, but with the power adapters installed and the wires at either end, expect it to take up a quite a bit of space (at the rear of the rack this typically isn't an issue, just be mindful of your devices that have a greater mounting depth and may interfere).

Print as oriented (mirror it if you want to mount on the left side, as shown in the photos). No supports, use at least 4 walls (infill doesn't matter). Make sure your bridging is well calibrated as there are a couple longer bridges.

Tagi