Universal FIFO can dispenser (Food and Beverage)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One FIFO (First In First Out) can dispenser to rule them all* (*mostly). Supports Øxh = 50-103mm x 52-138mm
- Ocena
- 4 / 5
- Polubienia
- 75
- Pobrania
- 201
- Wydruki
- 1
- Wyświetlenia
- 1938
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Features: Supports a whide range of cans through the adjustable top shelf and spacers.
Supported cans: Ø= ~50mm min to ~103mm max / Hight= ~52mm min to ~138mm max
Print settings: Wall x 3 / Layer hight=0.2mm / Infill=15% Gyroid / Supports=none
Assembly:
Tools reqired: Rubber mallet / a piece of wood as a hammer chisel / Knife or sandpaper for fitment (if necessary) / Metal saw
Hardware reqired: 4x M5x12mm screws (head Ø 9.5mm max)/ M5 threaded rod / 6x M5 nuts
Print “Front” + “Front” mirrored + “Rear” + “Rear” mirrored + "Top shelf" x2 and Spacer in appropriet size x3 (max hight without spacers is 58mm). (mirroring is possible in the slicer)
Gradually hammer the “Front & ”Rear" part together using a rubber mallet, the connection is designed to be a 0 interference fitt expt vor the 60° outside corners (if fittment is to thight, scharpen these corners with a knife or sandpaper). The “Top shelf” part is mountet using 2 M5x12mm screws. At this step you chose the appropriet mountig holes for your can size and the top shelf angle (3° or 6°). Cut th M5 threaded rod to length and put everything together.
It is possible to assemble multiple units as one pice using a longer M5 threaded rod that passes through all units.