1 / 4
Universal FIFO can dispenser (Food and Beverage) — image 1
1 / 4

Universal FIFO can dispenser (Food and Beverage)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

One FIFO (First In First Out) can dispenser to rule them all* (*mostly). Supports Øxh = 50-103mm x 52-138mm

Rating
4 / 5
Likes
75
Downloads
201
Makes
1
Views
1,938
Reviews
1

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

Features: Supports a whide range of cans through the adjustable top shelf and spacers.

Supported cans: Ø= ~50mm min to ~103mm max / Hight= ~52mm min to ~138mm max 

 

Print settings: Wall x 3 / Layer hight=0.2mm / Infill=15% Gyroid / Supports=none

 

Assembly: 

Tools reqired: Rubber mallet / a piece of wood as a hammer chisel / Knife or sandpaper for fitment (if necessary) / Metal saw

Hardware reqired: 4x M5x12mm screws (head Ø 9.5mm max)/ M5 threaded rod / 6x M5 nuts

Print “Front” + “Front” mirrored + “Rear” + “Rear” mirrored + "Top shelf" x2 and Spacer in appropriet size x3 (max hight without spacers is 58mm). (mirroring is possible in the slicer)

Gradually hammer the “Front & ”Rear" part together using a rubber mallet, the connection is designed to be a 0 interference fitt expt vor the 60° outside corners (if fittment is to thight, scharpen these corners with a knife or sandpaper). The “Top shelf” part is mountet using 2 M5x12mm screws. At this step you chose the appropriet mountig holes for your can size and the top shelf angle (3° or 6°). Cut th M5 threaded rod to length and put everything together.

 

It is possible to assemble multiple units as one pice using a longer M5 threaded rod that passes through all units.

 

Tags