1 / 2
Prusa MK3s Mosquito Magnum+ + LGX Lite Extruder (Orbiter 2 mount) — zdjęcie 1
1 / 2

Prusa MK3s Mosquito Magnum+ + LGX Lite Extruder (Orbiter 2 mount)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

IT EXTRUDS THE MEGA DONG FAST

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
219
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A hogwash of parts that make the mk3s take a mosquito magnum+ and a lgx lite through a orbiter 2 adapter. 

It should fit either bear or stock x ends due to the hybrid carriage. 

This can take 2 heater cartridges with the carriage missing a corner. Use the stock one from thingiverse if you are not doing 2 heater cartridges. 

Tagi