Asus Zephyrus G15 2021 Power Brick Under Desk Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Suits the Asus 200w AC Adaptor ADP-200JB D. Screws under a desk to mount the power adaptor while being easily removed.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Screws are used to mount it under a desk. Cables connected on both sides slide in easily.
Neatens up my desk a little, and is easy to pop out for travel.
Suitable for Asus 200w AC Adaptor Part ADP-200JB D
The dimensions of the power brick are 153L 73W 24H.
So if you have something similar or smaller, it will probably work.
Print Settings
I recommend PLA+ or Matte PLA, as regular PLA can creep a little over time. The additives in each of these increase the stiffness and heat resistance a little.
PETG is fine due to the extra heat resistance.
I printed in 0.16mm, with 0.2mm first layer for better adhesion.
UPDATE
Using eSUN PLA+, it has lasted me three years with the tiniest bit of sagging. Not enough to matter.