1 / 2
Asus Zephyrus G15 2021 Power Brick Under Desk Mount — image 1
1 / 2

Asus Zephyrus G15 2021 Power Brick Under Desk Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Suits the Asus 200w AC Adaptor ADP-200JB D. Screws under a desk to mount the power adaptor while being easily removed.

Rating
0 / 5
Likes
5
Downloads
53
Makes
0
Views
226
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

Screws are used to mount it under a desk. Cables connected on both sides slide in easily.
Neatens up my desk a little, and is easy to pop out for travel.

Suitable for Asus 200w AC Adaptor Part ADP-200JB D
The dimensions of the power brick are 153L 73W 24H.
So if you have something similar or smaller, it will probably work.

 

Print Settings

I recommend PLA+ or Matte PLA, as regular PLA can creep a little over time. The additives in each of these increase the stiffness and heat resistance a little.
PETG is fine due to the extra heat resistance.

I printed in 0.16mm, with 0.2mm first layer for better adhesion.

UPDATE

Using eSUN PLA+, it has lasted me three years with the tiniest bit of sagging. Not enough to matter.

Tags