Prusa XL nozzle silicone wipers (new version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front and back silicone nozzle wipers for Prusa XL (wipers are "must have" for multitool printing).
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 452
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Uses A1 mini brushes. https://www.aliexpress.com/item/1005008129071080.html
Baskets are optional, but catches most of the filament scraps.
Brush at the front is fixed on frame (not the bed) so you can wipe any time (not just first layer).
I use it after tool change and after every layer.
M3 screws and nuts are required. Metal or 3D printed 3030 T-nuts are required (printed available for example here: https://www.printables.com/model/134515-3030-m3-t-nut-drop-in-less-height-and-solid-sides-).
Optional magnets 10*5*1mm (or 10*5*1.2mm) are used to ensure the baskets stays in place (be careful about the polarization/side of the magnets, especially for back baskets - outside magnets).
For the front wiper split the A1 mini silicone brush in half.
G-CODE for front brush:
; Nozzle wipe brush cycle
G10
G1 X340 Y-8 F24000
G1 X360 Y-8 F10000
G1 X340 Y-7 F10000
G1 X360 Y-7 F10000
G1 X340 Y-6 F10000
G1 X360 Y-6 F10000
G1 X340 Y-5 F10000
G1 X360 Y-5 F10000
G1 X360 Y0 F24000
G11
; end of nozzle wipe
* Recommend to put the G-Code in the printer settings in the “after layer change” and at the end of “tool change”.