Craftsman 315.17480 router to Hirsh Router Table adapter plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter plate to allow a Craftsman 315.17480 router to mount to a Hirsh Router Table
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is an adapter plate to allow a Craftsman 315.17480 router (or any model with the same 67.7 mm radius 120 degree (3) mounting holes) to a Hirsh router table.
Theoretically, you could also just countersink 4 holes 127 mm apart in a square pattern on any workbench or block of wood and mount the router that way without the Hirsh table, I'm not the boss of you.
I suggest cutting a steel plate as a backing material like I have done, the 3D print might be enough, but the steel helps shore things up a bit when it has the weight of the router pulling on it long-term (I rarely use my router outside of the table config).
There is a mostly parameterized f3d model if you need to make adjustments.
I printed with effectively 100% infill (enough top and bottom layers such that there was no infill). You may not need to do that, but it's just a bit of extra time and filament, so I think it's a good idea.