Craftsman 315.17480 router to Hirsh Router Table adapter plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adapter plate to allow a Craftsman 315.17480 router to mount to a Hirsh Router Table
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 160
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is an adapter plate to allow a Craftsman 315.17480 router (or any model with the same 67.7 mm radius 120 degree (3) mounting holes) to a Hirsh router table.
Theoretically, you could also just countersink 4 holes 127 mm apart in a square pattern on any workbench or block of wood and mount the router that way without the Hirsh table, I'm not the boss of you.
I suggest cutting a steel plate as a backing material like I have done, the 3D print might be enough, but the steel helps shore things up a bit when it has the weight of the router pulling on it long-term (I rarely use my router outside of the table config).
There is a mostly parameterized f3d model if you need to make adjustments.
I printed with effectively 100% infill (enough top and bottom layers such that there was no infill). You may not need to do that, but it's just a bit of extra time and filament, so I think it's a good idea.