MikroTik CRS305-1G-4S+IN 6-inch Rack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 6-inch rack mount for the MikroTik CRS305-1G-4S+IN switch.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A 6-inch rack mount for the MikroTik CRS305-1G-4S+IN switch.
I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't installed them.
This switch can get really hot while operating. Do not print it in PLA/PLA+ or PETG. Use filaments like ABS, ASA, PA or PC.
This model is part of a series of 6-inch rack mounts I've designed. You can check out the others here.
Do you like my models? Consider buying me a coffee ;)
Print Settings
Rafts:
Doesn't Matter.
Supports:
No.
Resolution:
0.2 or 0.24
Walls/Perimeters:
At least 3.
Infill:
20% or more
Filament:
ABS/ASA/Nylon/PC
