1 / 3
MikroTik CRS305-1G-4S+IN 10-inch Rack Mount — zdjęcie 1
1 / 3

MikroTik CRS305-1G-4S+IN 10-inch Rack Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 10-inch rack mount for the MikroTik CRS305-1G-4S+IN switch.

Ocena
0 / 5
Polubienia
21
Pobrania
185
Wydruki
0
Wyświetlenia
854
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A 10-inch rack mount for the MikroTik CRS305-1G-4S+IN switch.

I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't installed them.

This switch can get really hot while operating. Do not print it in PLA/PLA+ or PETG. Use filaments like ABS, ASA, PA or PC.

This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here.

I have added a .3MF project file as well.

Do you like my models? Consider buying me a coffee ;)

Print Settings

Rafts:
Doesn't Matter.

Supports:
No.

Resolution:
0.2 or 0.24

Walls/Perimeters:
At least 3.

Infill:
20% or more

Filament:
ABS/ASA/Nylon/PC

Tagi