Kobra 2 Max Print Head Upgrade Fan 5015 (Heatbreak/Cooling) Include LED Banner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kobra 2 Max Print Head Upgrade with 5015 Fans 3 Set for Heatbreak/Cooling Parts Include LED Banner
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 559
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The headprint was improved from last project as https://www.printables.com/model/1015224-xxx-3-fans-print-head-for-anycubic-kobra-2-series
By
1. To change position of Model attached to Heat Sink that easily more last model

2. To add LED Box at Top of Print Head


3. To improve some points of model to be more efficient
Paremeter of prusa slicer

To improve fan installation
For Anycubic/Kobra 2 Max Logo was printed with 2 color white/black or any you desire by load to prusa slicer will self detect color change.
Material
1. M3 x 15 mm. 2 set for Heat Sink attached [ insert before Fan installation ]
2. M3 x 20 with Bolt 3 sets for Fan installation
3. COB LED strip 24 V short piece (6 cm. ) color depend on you


4. LED Plate for under fan to print model (if any)
