1 / 5
Netzteil Halterung für die Tischunterseite (LG Display 27UP850-W) — zdjęcie 1
1 / 5

Netzteil Halterung für die Tischunterseite (LG Display 27UP850-W)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Netzteil Halterung zum anschrauben auf der Tischunterseite. Das Netzteil darf maximal 30mm hoch und 85mm breit sein.

Ocena
0 / 5
Polubienia
2
Pobrania
35
Wydruki
0
Wyświetlenia
464
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution

Die Halterung wurde für ein Monitornetzteil von einem LG Display (27UP850-W) entwofren und ist für die Montage unter einem Tisch gedacht. Die Schrauben fixieren das Netzteil sicher, es kann dennoch leicht entnommen werden. Das Netzteil hat eine Größe von L=180mm, B=85mm, H=30mm.

Druckdaten:

  • Material: PLA
  • Schichthöhe: 0,2mm
  • Infill: 25%
  • Schichten oben und unten: 3
  • Wandlinien: 3
  • Stützstruktur: größtenteils keine / teilweise konzentrisch (unter Schraubenbohrung)

Benötigte Materialien:

  • PLA
  • 4x Senkkopf Schraube 4 x 40mm

Druckliste:

  • 2x buegel.stl

 

→ENGLISH VERSION ←

The bracket was designed for a monitor power supply from an LG display (27UP850-W) and is intended for mounting under a table. The screws securely fix the power supply, but it can still be easily removed. The power supply has a size of L=180mm, W=85mm, H=30mm.

Print data:

  • material: PLA
  • layer height: 0,2mm
  • infill: 25%
  • top and bottom layers: 3
  • wall layers: 3
  • support structure : mostly none / partly concentric (under screw bore)

Required materials:

  • PLA
  • 4x Countersunk head screw 4 x 40mm

Print list

  • 2x buegel.stl

Tagi