1 / 3
22 tooth idler Pulley Rat Rig VC-4 with 5x10x4 bearing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 22 tooth idler pulley for improving my IS
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This pulley used on my Y path for my Idex VC-4 improved my IS (4 required) and allowed me to get MZV IS.
Printed without support, 0.2mm layer, ABS
Use two 5x10x4 ball bearing
