1 / 1
Anycubic Kobra Max direct drive (stock parts, fits all backplates)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Direct drive mod for Anycubic Kobra Max, using all stock parts, fits all sorts of backplates (larger and smaller tabs)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
This mod only requires one cable extension for the stepper motor, and all the stock hardware. Should work with both the older backplate (smaller tab) and the newer (wider tab).
PTFE tube length is 100mm without all metal heatbreak.
STEP is provided so you can mix and mash all you want, remixes and constructive criticisms gladly accepted.
Print with ASA, 3 walls and 30% infill for best rigidity; motor face down, supports only on the motor's face.