Single Print Track and Extended Drive Frames for Piranha Death Racer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Single Print TPU Track and Extended Drives Frames for better track tension.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a single print TPU track for the Piranha Death Racer and a new set of drive frames that are longer to keep the single print track a little tighter.
As well as a blank side panel for the longer frame that you can customize.
These drive frames also allow the motor to be inserted from the outside while attached to the main frame. Handy for maintenance.
These are still a bit of a work in progress. Torture testing in actual battles at the RepRap Festivals is definitely needed. So please give any feedback you have!
If you have not already got your own Death Racer you can find it here https://www.printables.com/model/1134616-piranha-death-racer