Single Print Track and Extended Drive Frames for Piranha Death Racer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Single Print TPU Track and Extended Drives Frames for better track tension.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 45
- Makes
- 1
- Views
- 318
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a single print TPU track for the Piranha Death Racer and a new set of drive frames that are longer to keep the single print track a little tighter.
As well as a blank side panel for the longer frame that you can customize.
These drive frames also allow the motor to be inserted from the outside while attached to the main frame. Handy for maintenance.
These are still a bit of a work in progress. Torture testing in actual battles at the RepRap Festivals is definitely needed. So please give any feedback you have!
If you have not already got your own Death Racer you can find it here https://www.printables.com/model/1134616-piranha-death-racer