Harken AirBlock support/holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hold a Harken AirBlock H2600 horizontally to keep it from dangling/banging
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I have a sailboat. The spinnaker sheets (big sail control lines) come back to the stern pulpit and through a H2600 AirBlock. This dangles and bangs. There is no obvious way to hold it in position, so I made this.
It is a loose fit in the shape of the hole, with 3 small “snap” bumps. It easily pushes through, but can be released as easily. When tied to something above it, it holds the block horizontal (fore/aft and port/starboard) as it would be in use, while still providing full movement as required.
This is 24/7 in the sunlight, so use an outdoor filament. I used ASA, PETG is probably good too. Black would look nicer! :)